Motorrad Auspuffanlage Barracuda ABE, 388.11 CHF

Please select only one component.

sleeve length 350mm 0.00 CHF

Please select only one component.

oval 0.00 CHF

Ovale Form des Dämpfers

Please select only one component.

sleeve aluminium, sleeve material/surface finish: matt black

sleeve material Aluminum - matt black 0.00 CHF

Matt Black Aluminium coating has been designed to protect both product and nonmetal substrates.

sleeve material - carbon reinforced +126.10 CHF

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited usage. * Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light. Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances. * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness. * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options. Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

sleeve material Aluminum - black velvet +145.51 CHF

Aluminum sheath coated with Black velvet Matt Ceramics. Matt Black Velvet, length 450-200mm, 2mm aluminum shell Our Ceramic coatings are temperature stable from 650°C, up to 1,100°C for the Black Velvet series. We process two high quality Ceramic formulations. The Ultra Performance Metallic Series. Temperature stable to over 650°C, Black Velvet offers very good corrosion protection, as well as optimum flexibility on all base materials. The Ultra Performance Satin Metallics are not comparable to conventional silicone products. Temperature stable up to over 1,100°C, our Ceramic Coatings are characterized by an optimal flex in combination with a hard and abrasion resistant surface. No calcification at constantly high operating temperatures, no cracking or detachment even at extreme temperature fluctuations. Properties Temperature stable up to over 1,100°C Excellent corrosion protection Optimum combination of flex and hardness Chemical resistant Very good thermal insulation / reduction of radiation temperature

Please select only one component.

Endcap SPX - mattblack 0.00 CHF

endcap SPX - titan ceramic +145.51 CHF

Endcap SPX - orange +96.99 CHF

endcap SPX - green +145.51 CHF

Please select only one component.

without catalyst 0.00 CHF

with catalyst +194.03 CHF

Please select only one component.

no catalyst 0.00 CHF

with catalyst EURO5 +291.07 CHF

Finish configuration

Make:	KTM GASGAS
Model:	690 SMC/SMC R Enduro /R SM 700 ES 700
Notes & Exceptions:	a1/e1
Year:	2023 2022 2021 2020 2019 2024
Exhaust series:	Slip-on
Remarks:	*45
Anmerkungen nach Ref Code:	5103

MGP-SPEEDPRO Predator Series Slipon KTM 690 SMC R / Enduro R / GASGAS SM 700 / ES 700

Please answer the question