Motorrad Auspuffanlagen - SPEEDPRO COBRAexhaust.de, 747.97 $

Please select only one component.

sleeve length 200mm 0.00 $

Please select only one component.

no grid 0.00 $

MotoGP Kit - Grid - Cobra SP1 +106.81 $

The MGP Grid can easily be mounted and removed, but it can not be used with removed db killer. Complete do-it-yourself kit with all parts. Please see pics above (scroll to the right side).

Please select only one component.

sleeve material stainless steel - titanium finish

sleeve - V2A stainless steel - titanium finish 0.00 $

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components . •Contemporary Satin/matte finish •Uniform heat coloration •Increased fatigue strength •Increased scratch and stain resistance

sleeve - carbon reinforced - glossy +160.24 $

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited usage. * Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light. Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances. * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness. * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options. Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

sleeve - V2A stainless steel - matt black +106.81 $

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling

Please select only one component.

clamp - V2A factory 0.00 $

Stainless Steel factory

clamp - V2A titanium finish +42.69 $

clamp - V2A matt black +64.06 $

clamp - V2A black velvet +85.43 $

Unsere Ceramic-Beschichtungen sind Temperaturstabil von 650°C, bis hin zu 1.100°C bei der Black Velvet Serie. Wir verarbeiten zwei hochwertige Ceramic Formulierungen. Die Ultra Performance Metallic Serie. Die Hochtemperatur Serie steht für eine hochglanzpolierte, chromähnliche Oberfläche. Temperaturstabil bis über 650°C bietet Black Velvet einen sehr guten Korrosionsschutz, sowie eine optimale Flexibilität auf allen Grundmaterialien. Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten. Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einer harten und abriebfesten Oberfläche aus. Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen. Eigenschaften Temperaturstabil bis über 1.100°C Excellenter Korrosionsschutz Optimale Kombination aus Flex und Härte Chemikalienbeständig Sehr gute thermische Isolierung / Verringerung der Abstrahltemperatur

Please select only one component.

sleeve material Aluminium - matt brushed

linkpipe stainless steel - factory 0.00 $

linkpipe stainless steel - titanium finish matt

linkpipes stainless steel - titanium finish +106.81 $

linkpipes stainless steel - matt black +106.81 $

Ultra Performance Coating based on silicon in matt black.

linkpipes stainless steel - Black Velvet ceramic +192.29 $

Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

Please select only one component.

SPEEDPRO COBRA - 3D nameplate 0.00 $

SPEEDPRO COBRA - 3D Nameplate with 3 D Look. - Aluminium made Notes * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm

SPEEDPRO COBRA Laserlogo +53.38 $

SPEEDPRO COBRA Laserlogo exclusive Notes: *Laserlogo, not possible on Carbon material * with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material. But this does not stress the strenghten . * the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm

Finish configuration

SPEEDPRO COBRA SP1 Slip-on Dual Race

Please answer the question

Please answer the question