Motorrad Auspuffanlagen - SPEEDPRO COBRAexhaust.de, 399,95 €

Please select only one component.

sleeve length 450mm 0,00 €

Please select only one component.

sleeve material stainless steel - titanium finish 0,00 €

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components. •Contemporary Satin/matte finish •Uniform heat coloration •Increased fatigue strength •Increased scratch and stain resistance

sleeve material stainless steel - matt black +99,95 €

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling

sleeve material - carbon reinforced +129,95 €

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited usage. * Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light. Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances. * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness. * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options. Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

Please select only one component.

without grid 0,00 €

with grid +99,95 €

Please select only one component.

linkpipe stainless steel - factory 0,00 €

V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

linkpipe stainless steel - titanium finish matt +99,95 €

Titanium Works Finish. A unique offering from Speed Products of Europe. Titanium Works Finish is not a coating, but a media blast finish using our own special recipe of ingredients. The result is a stainless steel exhaust that after it goes through a heat cycle on the motorcycle, takes on unique coloring that looks much like those works components our factory racers use.

linkpipe stainless steel - matt black +99,95 €

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.

linkpipe stainless steel - Black Velvet +179,95 €

Black Velvet Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

Please select only one component.

sleeve material Aluminium - matt brushed

clamp - V2A factory 0,00 €

Stainless Steel factory

sleeve aluminium, sleeve material/surface finish:...

clamp - V2A titanium finish +19,95 €

Stainless steel clamp titanium finish

sleeve aluminium, sleeve material/surface finish: matt black

clamp - V2A matt black +29,95 €

Stainless steel in matt black

clamp - V2A black velvet +39,95 €

Stainless steel clamp in Black Velvet matt. Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

Please select only one component.

link pipe - without heatshield 0,00 €

link pipe - with Carbon heatshield +99,95 €

Please select only one component.

SPEEDPRO COBRA - 3D nameplate 0,00 €

SPEEDPRO COBRA - 3D Nameplate with 3 D Look. - Aluminium made Notes * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm

SPEEDPRO COBRA Laserlogo +49,95 €

SPEEDPRO COBRA Laserlogo exclusive Notes: *Laserlogo, not possible on Carbon material * with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material. But this does not stress the strenghten . * the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm

Finish configuration

Make:	BMW
Model:	F 650 CS Scarver
Exhaust series:	Slip-on
Year:	2005 2004 2003 2002 2001

SPEEDPRO COBRA SPX Slip-on Road Legal/EEC/ABE homologated BMW F 650 CS Scarver

Please answer the question