Homepage
Homepage

Illustration exemplary

SPEEDPRO COBRA SPX Slip-on Race

SKU: 8SX-XXXX-34R

Slip-on RACING Exhaust
Complete mounting kit including link pipe and all mounting parts.
The muffler has a diameter of 100mm.

from

399,95 €

incl. 19% VAT , (Paket)

Available!

Due to the high volume of orders and the effects of the pandemic, delivery times may be longer.

Delivery time: 0 Workdays (Other countries)

Configure

Production according to customer specifications

Our exhaust systems are manufactured according to customer requirements and customer specifications. They are not stock items (stock items are marked accordingly and cannot be adapted, changed or configured), but are manufactured individually according to customer requirements within the production possibilities.
Hierzu gilt: nach § 312d Abs. 1 Nr. 1 BGB besteht ein Widerrufsrecht nicht bei Fernabsatzverträgen zur Lieferung von Waren, die nach Kundenspezifikation angefertigt werden. Lesen Sie hierzu auch weitere Angaben zum Widerrufsrecht und zur AGB. Da Auspuffanlagen aber handgefertigt werden, kann es bei bestimmten Anlagen zu Lieferverzögerungen kommen. Schalldämpfer, Krümmer und Auspuffanlagen sind jedoch keine Massenproduktionsware, sondern werden in liebevoller Handarbeit von Fachleuten nach Ihren Wünschen und Spezifikationen geschweißt, poliert, hergestellt und veredelt. We make every effort to keep delivery times as short as possible.
All important information can be found on the left under further customer information.

Configure your product

Please select only one component.

350mm sleeve length 0,00 €

Quantity: 1

Upgrade sleeve length 300mm +89,95 €

Upgrade sleeve length to 300mm. This item cannot be ordered individually, only as an upgrade option (surcharge).

Quantity: 1

Upgrade sleeve length from 350mm to 250mm +99,95 €

Upgrade sleeve length to 250mm. This item cannot be ordered individually, only as an upgrade option (surcharge).

Quantity: 1

Upgrade sleeve length 200mm +129,95 €

Upgrade sleeve length to 200mm. This item cannot be ordered individually, only as an upgrade option (surcharge).

Quantity: 1

Please select only one component.

sleeve material/surface finish: Titanium Finish

sleeve material - stainless steel - titanium finish 0,00 €

Quantity: 1

sleeve material - stainless steel - Matt black +99,95 €

Quantity: 1

Sleeve - Carbon +129,95 €

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited usage. * Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light. Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances. * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness. * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options. Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

Quantity: 1

sleeve - V2A stainless steel - titan Ceramics +109,95 €

Titan Ceramics Titan Ceramics is satin titanium Soft Touch Cermaics Coating. Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

Quantity: 1

sleeve material - stainless steel - Black Velvet ceramics +149,95 €

Quantity: 1

Please select only one component.

sleeve material Aluminium - matt brushed

clamp - V2A factory 0,00 €

Stainless Steel factory

Quantity: 1

sleeve aluminium, sleeve material/surface finish:...

clamp - V2A titanium finish +19,95 €

Stainless steel clamp titanium finish

Quantity: 1

sleeve aluminium, sleeve material/surface finish: matt black

clamp - V2A matt black +29,95 €

Stainless steel in matt black

Quantity: 1

clamp - V2A black velvet +39,95 €

Stainless steel clamp in Black Velvet matt. Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

Quantity: 1

Please select only one component.

Muffler might use a removeable baffle insert ( DB Killer). A Db Killer could transform a Race pipe into a Street oder Road legal exhaust, matching British Standard(BSAU Mark) and/or European EEC homologation( E-Mark) Quickly removed via key(comes with), given a full race bike sound.

No DB Killer: race style 0,00 €

Full race sound.

Quantity: 1

Eagle Sidewinder/Cobra Speedster/Classic Cruiser DB...

DB Killer SQ +49,95 €

Quantity: 1

Please select only one component.

without grid 0,00 €

Quantity: 1

with grid +99,95 €

Quantity: 1

Please select only one component.

linkpipe stainless steel - factory 0,00 €

V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

Quantity: 1

linkpipe stainless steel - titanium finish matt +99,95 €

Titanium Works Finish. A unique offering from Speed Products of Europe. Titanium Works Finish is not a coating, but a media blast finish using our own special recipe of ingredients. The result is a stainless steel exhaust that after it goes through a heat cycle on the motorcycle, takes on unique coloring that looks much like those works components our factory racers use.

Quantity: 1

linkpipe stainless steel - matt black +99,95 €

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.

Quantity: 1

linkpipe stainless steel - Black Velvet +179,95 €

Black Velvet Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

Quantity: 1

Please select only one component.

link pipe - without heatshield 0,00 €

Quantity: 1

link pipe - with Carbon heatshield +99,95 €

Quantity: 1

Please select only one component.

SPEEDPRO COBRA - 3D nameplate 0,00 €

SPEEDPRO COBRA - 3D Nameplate with 3 D Look. - Aluminium made Notes * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm

Quantity: 1

SPEEDPRO COBRA Laserlogo +49,95 €

SPEEDPRO COBRA Laserlogo exclusive Notes: *Laserlogo, not possible on Carbon material * with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material. But this does not stress the strenghten . * the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm

Quantity: 1

Finish configuration

Your configuration

incl. 19% VAT , (Paket)

Description
Reviews

SPEEDPRO COBRA SPX Serie

SPEEDPRO COBRA SPX Series motorcycle exhaust systems are known for their quality and full sound.
The mufflers/silencers are available in different length, materials and shapes.

More features are:

- Made in Germany
- low weight
- removable DB Killer
- super-light holder
- corrosion-resistant construction
- 2 years warranty
- full sound